PATINISING AND AGEING BY OXIDATION OF
NON-TANNIC WOODS, SPRUCE, RESINOUS WOODS,

0853 - 0852

EXTERIOR - INTERIOR

For: CHALETS, PARQUETS, FURNITURE, FITTINGS, OBJECTS, FRAMES, ETC. GIVES WOOD AN "AGED-BY-TIME" APPEARANCE. Several applications are required. The result is amazing and the cost price is considerably lower than that of reclaimed wood. It allows very consistent, variations in shade and is long-lasting as real oxidisation takes place.

This treatment is an oxidisation carried out on new or old unvarnished, unstained and unwaxed wood.
Trial applications are needed before applying to the workpiece, to master the technique for applying these products and achieving the desired result. A broad range of patinas and colours are available to suit the wishes of the operator.

PREPARATION

Wood may be rough sawn, sanded, brushed, shot blasted, sand blasted, gummed, etc.
It must be dry. The product must be applied at an ambient temperature of 15°C or more.

APPLICATION

These products may be applied by hand, sprayed using a crop sprayer, or brushed in abundant, even coats. They may also be applied using a sponge or nylon brush.
They may be applied industrially by pump or machine and tunnel dried (25 < 30°) and more All these products may be diluted with water, thus enabling many personalised shade variations.

"IT IS POSSIBLE TO LEAVE VERY LITTLE DRYING TIME BETWEEN COATS, WHICH WILL GIVE OTHER SHADE VARIATIONS."

GREY

Greying Agent 0853 is applied in an even, generous coat.
Natural drying: 1 to 3 hours at ambient temperature.
Greying Agent 0852 is applied in an even, generous coat.
Natural drying: 1 to 3 hours at ambient temperature.
GREYING AGENT 0852 is then applied as a third coat, giving the final touch to this patina.
Natural drying: 1 to 3 hours at ambient temperature.

The various products dry both horizontally and vertically.
• When dried horizontally at ambient temperature, the harder grain is more apparent.
• When dried vertically, the finish is more even.

Indoor finish
Interior woodwork, panelling, beams, furniture, kitchens, parquet flooring, etc.
Wood patinated in this way can receive a range of finishes:
Adding whitening paste 0698 gives the appearance of old "DRIFTWOOD" (Can be tinted. See DATASHEET). Over this finish can be added our aqueous wax oil, PROTEC WOOD 0273 MATTE INTERIOR (SEE DATASHEET), a paste wax 0001 or colourless liquid wax 0020.

It is possible to apply MATTE INVISIBLE WATER-BASED OIL 0218 for colourless parquet flooring, leaving the colour unchanged, or colourless parquet wax 0052, or polyurethane parquet varnish.

Exterior finish
OLD CHALETS PATINA:
We call this patina "old chalets" because these products give wood the appearance of having spent many years in the sun, the snow and the rain.
For finishing, you could apply our water-based wax oil PROTEC WOOD 0271 MAT ANTI UV EXTERIOR (SEE DATASHEET).

OLD GREY DRIFTWOOD (Patina possibility).
1) Spray application of Chalet Ageing Agent No. 1 0853 ALLOW TO DRY
2) Application of Chalet Ageing Agent No. 2 0852 pure. ALLOW TO DRY
3) You can make marks, or mark the knots with:
Chalet Ageing Agent 0853 pure, then reveal them after drying with a general application of 0852.

It can be decorated with spots of Evening Agent 0844 and Ageing Agent 0843. ALLOW TO DRY

Spray application of Whitening Paste 0698, mixed at 100g/l water (or any other concentration depending on the desired result) Drying and removal of excess powder by PAD or brush.
"SEE DATASHEET".
Application of Wax Oil PROTEC WOOD 0271 Matte Anti UV in two coats applied wet on wet. "SEE DATASHEET"

FOR MORE COLOUR PATINAS

LIGHT COGNAC SPICE BREAD

1) Application of Chalet Ageing Agent No. 1 0853 Allow to dry
2) Application of Chalet Ageing Agent No. 2 0852 Allow to dry
3) Application of Ageing Agent 0843 Allow to dry
"Then proceed as above for marks and finishes."

HONEY

• 1+2+3 same operation as above then Evening Agent 0844. Allow to dry "Then proceed as above for marks and finishes."

Never mix these products together, as this could create an ineffective precipitate.

SAFETY

Carefully read the safety label.
Work in a well-ventilated room.
Wear rubber gloves.
Do not swallow.
Keep out of the reach of children.

Information given in good faith, but no liability is assumed

> VOIR EN PDF