PATINISING AND AGEING BY OXIDATION OF
NON-TANNIC WOODS, SPRUCE, RESINOUS WOODS,

0853 - 0852

EXTERIOR - INTERIOR

For: CHALETS, PARQUETS, FURNITURE, FITTINGS, OBJECTS, FRAMES, ETC. GIVES WOOD AN "AGED-BY-TIME" APPEARANCE. Several applications are required. The result is amazing and the cost price is considerably lower than that of reclaimed wood. It allows very consistent, variations in shade and is long-lasting as real oxidisation takes place.

This treatment is an oxidisation carried out on new or old unvarnished, unstained and unwaxed wood.
Trial applications are needed before applying to the workpiece, to master the technique for applying these products and achieving the desired result. A broad range of patinas and colours are available to suit the wishes of the operator.

PREPARATION

Wood may be rough sawn, sanded, brushed, shot blasted, sand blasted, gummed, etc.
It must be dry. The product must be applied at an ambient temperature of 15°C or more.

APPLICATION

These products may be applied by hand, sprayed using a crop sprayer, or brushed in abundant, even coats. They may also be applied using a sponge or nylon brush.
They may be applied industrially by pump or machine and tunnel dried (25 < 30°) and more All these products may be diluted with water, thus enabling many personalised shade variations.

"IT IS POSSIBLE TO LEAVE VERY LITTLE DRYING TIME BETWEEN COATS, WHICH WILL GIVE OTHER SHADE VARIATIONS."

GREY

Greying Agent 0853 is applied in an even, generous coat.
Natural drying: 1 to 3 hours at ambient temperature.
Greying Agent 0852 is applied in an even, generous coat.
Natural drying: 1 to 3 hours at ambient temperature.
GREYING AGENT 0852 is then applied as a third coat, giving the final touch to this patina.
Natural drying: 1 to 3 hours at ambient temperature.

The various products dry both horizontally and vertically.
• When dried horizontally at ambient temperature, the harder grain is more apparent.
• When dried vertically, the finish is more even.

Indoor finish
Interior woodwork, panelling, beams, furniture, kitchens, parquet flooring, etc.
Wood patinated in this way can receive a range of finishes:
Adding whitening paste 0698 gives the appearance of old "DRIFTWOOD" (Can be tinted. See DATASHEET). Over this finish can be added our aqueous wax oil, PROTEC WOOD 0273 MATTE INTERIOR (SEE DATASHEET), a paste wax 0001 or colourless liquid wax 0020.

It is possible to apply MATTE INVISIBLE WATER-BASED OIL 0218 for colourless parquet flooring, leaving the colour unchanged, or colourless parquet wax 0052, or polyurethane parquet varnish.

Exterior finish
OLD CHALETS PATINA:
We call this patina "old chalets" because these products give wood the appearance of having spent many years in the sun, the snow and the rain.
For finishing, you could apply our water-based wax oil PROTEC WOOD 0271 MAT ANTI UV EXTERIOR (SEE DATASHEET).

OLD GREY DRIFTWOOD (Patina possibility).
1) Spray application of Chalet Ageing Agent No. 1 0853 ALLOW TO DRY
2) Application of Chalet Ageing Agent No. 2 0852 pure. ALLOW TO DRY
3) You can make marks, or mark the knots with:
Chalet Ageing Agent 0853 pure, then reveal them after drying with a general application of 0852.

It can be decorated with spots of Evening Agent 0844 and Ageing Agent 0843. ALLOW TO DRY

Spray application of Whitening Paste 0698, mixed at 100g/l water (or any other concentration depending on the desired result) Drying and removal of excess powder by PAD or brush.
"SEE DATASHEET".
Application of Wax Oil PROTEC WOOD 0271 Matte Anti UV in two coats applied wet on wet. "SEE DATASHEET"

FOR MORE COLOUR PATINAS

LIGHT COGNAC SPICE BREAD

1) Application of Chalet Ageing Agent No. 1 0853 Allow to dry
2) Application of Chalet Ageing Agent No. 2 0852 Allow to dry
3) Application of Ageing Agent 0843 Allow to dry
"Then proceed as above for marks and finishes."

HONEY

• 1+2+3 same operation as above then Evening Agent 0844. Allow to dry "Then proceed as above for marks and finishes."

Never mix these products together, as this could create an ineffective precipitate.

SAFETY

Carefully read the safety label.
Work in a well-ventilated room.
Wear rubber gloves.
Do not swallow.
Keep out of the reach of children.

Information given in good faith, but no liability is assumed

> VOIR EN PDF


Contactez-nous

Pour obtenir de l'aide ou des informations pratiques, contactez-nous au :

Tél. :(33) 04 72 35 16 27

Fax : (33) 04 78 54 53 71

Contacter notre service client
  • Easy Lab Finish
  • Easy Lab Finish
  • Easy Lab Finish
  • Easy Lab Finish
  • Easy Lab Finish

CONTACT US

Germany Germany, netherlands Netherlands
info@dupradal-concepts.de
Tel : + 49 170 204 8979
Wir suchen Vertriebshändler für unsere verschiedenen Produkte.
Bitte wenden Sie sich an uns: easylab@easylabfinish.com


lithuania Lithuania, russia Russia
info@easylab.lt
Tel : + 370 (677) 77 890

usa U.S.A.
rroth@easylabusa.com
Tel : + 1 (818) 606-5157
We are looking for distributors for our products.
Please contact us at: easylabusa@easylabusa.com


spain Spain
easylabspain@aglayaart.com
Tel : 00 34 985 312 601
Buscamcs distribuidores para nuestros distintos productos.
Gracias por ponerse en contacto con nosotros: easylab@easylabfinish.com


poland Poland
jowilhelmi@wp.pl
Tel : + 48 605 254 541
Poszukujemy dystrybutorów dla naszych rozmaitych produktów.
Prosimy o kontakt na adres: easylab@easylabfinish.com


mexico Mexico
jpo@easylabusa.com
Tel : + 1 (626) 487 1812

swiss Swiss
luciani.distribution@
hotmail.com
Tel : 00 41 22 341 44 47
Nous recherchons des distributeurs pour nos produits.
Merci de nous contacter à : easylab@easylabfinish.com
Wir suchen Vertriebshändler für unsere verschiedenen Produkte.
Bitte wenden Sie sich an uns: easylab@easylabfinish.com


italia Italia
COLOR VAL DI BORSATTI
MR Angelo Borsatti
colorval@gmail.com
00 39 03 42 35 40 50

Hungary Hungary, Croatia Croatia,
Romania Romania
CETWA Kft. Budapest, 1196 Kisfaludy u. 66
cetwa@cetwakft.t-online.hu
Tel: 0033 688 60 47 93
Fax: 0036 1357 67 08